Monophasé
Single-Phase DIN-Rail Meter with CIU
Single Phase DIN-Rail Meter
The CA168 - SF57 is a single - phase rail - mounted meter. It is designed to accurately measure electrical energy for various applications, suitable for both commercial and residential use. The meter can be applied to payment scenarios as it is compliant with DLMS and STS. Communication with an optional Customer Interface Unit (CIU) can be carried out via M - bus, PLC, LORA, or RF.
Introduction
Introduction
Caractéristiques principales
- Rated Parameters: 230V, 5(60)A, 50HZ, Class 1.0 accuracy
- Communication Modes: M - bus, PLC, LORA, RF
- Interface: Equipped with RS485
- Optional Component: CIU available
- Anti - Theft Feature: Anti - electricity - stealing function
- Wiring Design: Up - in and down - out wiring layout
- Certifications: DLMS and STS certified
Split Configuration (if applicable)
Since the CIU is optional, if there is a split configuration, the Metering & Control Unit (MCU) and CIU could potentially be linked through the available communication methods (M - bus, PLC, RF). The CIU could be installed within the consumer’s premises for user - friendly interaction, while the MCU could be placed in a meter cabinet at a suitable location away from the consumer for better management and protection. However, details would be subject to specific requests.
Parameters
| Electrical parameters: | ||
| Voltage | ||
| Nominal voltage Un | 220/230/240V | |
| Limited voltage | 50%~130%Un | |
| Frequency | ||
| Nominal frequency fn | 50-60Hz | |
| tolerance | 5% | |
| Current | ||
| Basic current(Ib) | 5A | |
| Maximum current(Imax) | 60A (100A optional) | |
| Starting current(Ist) | 20mA | |
| Active energy constant | 1000imp/kWh | |
| Measurement Accuracy | ||
| Active energy to IEC62053-21 | Class1.0 | |
| Burden | ||
| Voltage circuit | <2W <8VA | |
| Current circuit | <1VA | |
| Temperature range | ||
| Operation meter | -25℃ to+70℃ | |
| Storage | -40℃ to+85℃ | |
| Insulation | ||
| Insulation level | 4kV rms 1min | |
| Voltage impulse withstand | 8kV 1.2/50 μs | |
| Insulation System Classification | Protective Class II | |
| Electro Magnetic Compatibility | ||
| Electrostatic discharges | ||
| Contact discharge | 8kV | |
| Air discharge | 16kV | |
| Electromagnetic RF fields | ||
| 27MHz to 500MHz typical | 10V/m | |
| 100kHz to 1GHz typical | 30V/m | |
| Fast transient burst test | 4kV | |
| Mechanical requirements | ||
| Meter shell Protection Rate | IP54 | |
| Insulation System Classification | Protective Class II | |
| Maximum cable size | 8 mm | |
